5 step inline device of Lawrence brand code 402103

This water purifier uses the reverse osmosis or RO method to purify water.

The water purification system in the inline water purifier has 5 stages of purification with five internal filters. These five filters are fiber filter, carbon block, granular carbon, membrane and post carbon.

The advantages of this device can be mentioned as having inline and cartridge filters. These two filters are completely similar in terms of function and are placed inside the filter housing. The following are the differences between these two filters:

The difference between the inline filter and the cartridge filter is more in its appearance and design.
Inline filters are easier to replace.
With these types of filters, the hand is not involved in changing the filter, and as a result, it is more hygienic.
Less space is occupied by the inline filter.
The price of inline filters is more expensive and this is because these types of filters have better quality than cartridge filters.
Inline filters are designed in such a way that the housing and the filter are combined and become a filter. You just have to separate the hoses from the top and bottom of the old filter. But the cartridge filters are inside the device housing.

Water purification steps in the inline water purifier

Water purification in the inline water purification device is done in the following steps:

The first stage of water purification in the inline water purifier

The first filter used in this device is the linear fiber filter. This filter has polypropylene fibers that, when water passes through this filter, prevents suspended particles larger than 5 microns such as mud, sand, algae, fungus, sludge, pipe rust, moss, and even small organisms in the water. prevents.

The second stage of water purification in the inline water purifier

In this step, granular activated carbon filter is used, which has a surface absorption property. So, in fact, this filter can: Chlorine, chemical gases that are soluble in water, and chemical organic substances and chlorine derivatives, trihalomethanes, and pesticides are removed from water. Chlorine is harmful to the body and can damage the filter membrane of the water purifier.

The third stage of water purification in the inline water purifier

This filter has a plant fiber base that is a compact piece. This stage complements the second stage with more power. This filter has the task of removing organic carbon, dissolved organic compounds, heavy metals, free chlorine and organic pollution left over from the previous steps. This action prevents contamination from reaching the membrane filter and thus increases its lifespan.

The fourth step is the membrane filter

Membrane filter or reverse osmosis is the main filter and step in water purification. The membrane filter has the ability to remove 99% of water pollution at this stage. This filter can also remove the salinity of the water.

The fifth stage of water purification in the inline water purifier

In reverse osmosis water purification devices, a storage tank is needed due to the slow speed of water purification. This tank is for keeping purified water in it. If there is too much water in the tank, the water may acquire an unpleasant smell and taste. To remove this smell and taste of water, a post-carbon filter is needed; This filter has the task of doing the same thing.

Specifications of the inline water purifier

The smallest reverse osmosis device
Minimum space occupied by the device
The lifespan of the inline purifier is twice as long as other brands of water purifiers.
It is equipped with a 15.2-liter tank made of the best anti-odor and antibacterial materials.
Equipped with a membrane filter with 13 layers of Taiwan Filmtec with a capacity of 75 gallons
Equipped with high (Hi) and low (Low) switch pump protection to turn off the device’s pump when the incoming water flow is interrupted and when the tank is full, which causes the pump’s power to the device to be cut off in an emergency.

Click here to see the complete explanation about the reverse osmosis or RO method.

Technical Specifications:

This device has 5 stages of water purification.

Inline PP capsule filter of Clean Pure brand
Inline UDF capsule filter of Clean Pure brand
CTO inline capsule filter of Clean Pure brand
75 gallon 13 layer Membrane from the original Taiwan FilmTec brand
Taiwan post carbon filter
Metal chassis without pressure gauge
Star tap, can be installed on the sink
4-gallon ipack tank with the ability to change the tube
Iranian 24 volt pump
Iranian adapter
Valve to adjust the amount of water solutes
Imported fittings
Iranian membrane housing
It has a complete equipment pack (wrench, hose, sewer clamp, device cover, pressure breaker)